Korg NTS-2 Oscilloscope Honeycomb Stand Keystep Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb stands for Korg NTS-2 Oscilloscope with an extended base to fit the Arturia Ketstep.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adaptation of original model: https://makerworld.com/en/models/127742#profileId-138237
Honeycomb stands for Korg NTS-2 Oscilloscope with an extended base to fit the Arturia Ketstep. No longer will the NTS-2 push away with use during play due to the added weight from the Keystep. Legs have cutouts for the screws found below the Keystep.
The print fits like a dream between the unit's corner screws and rubber feet. The unit sits at a 50-degree angle. The unit sits 20mm above the ground for headphone port access and cable clearance typically found with DAW-less setups.
Assembly:
Printed supports are not necessary. To attach the stands, the corner screws must be removed to slide the stand onto the unit.