Fractal Design Node 804 Drive Bay Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fractal Design Node 804 Drive Bay Rails
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 2079
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I got a Node 804 on FB marketplace, but it didn't have the Drive cages or the Rails to mount them on. I was able to print the Drive cages found HERE
But unfortunately that still left a way to mount them to the case itself. Unluckily for me the rails weren't included in my find.
So I decided to make the rails myself.
To screw them in, I used 5/8" #6 Pan Head Phillips screws I got from Home Depot.
Also there's an annoying rivet on the far end of the case. You can just use a knife to cut a small chunk out of the plastic 38mm from the front of the last rail on the right side that faces the back of the case.
If you don't want to do that you can modify the Blender Models I'm including.