A1 Riser Anti Vibration / Noise Reduction

I did not like any of the feet currently floating around and the ones I did required extra stuff like squish balls. So I taught myself what I needed for fusion 360 and stayed up too late a couple nights to make this. 

The tpu top pad piece slots perfectly into the screw holes on the underside corners of the machine, tpu feet sit in the bottom, you can print the body out of whatever, I chose abs as I plan on making a fan shroud to actively cool the internals so it can be enclosed, but I test printed multiple iterations in pla and petg with both holding the weight fine.

Note: The walls and really any plastic part of the feet should not touch the printer, I deliberately left a gap so there isnt any vibration noises and only the tpu pad makes contact.

Print Requirements

NEED SUPPORTS on the Front/Rear pieces (I did normal auto, snug, build plate only) rotate the Foot with filet up or down depending on which side you want to contact the table surface.

4 x Foot

2 x Front

2 x Rear (IMPORTANT) Mirror ONE to fit other side, it will work fine otherwise but for aesthetics flip it.

2 x PadFront

2 x PadRear

Alternately use the presorted plates which are separated by material.

No specific slicer settings other than supports so use what you're comfortable with.