Bottle Inversion Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to invert bottles so the contents are always near the cap.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About:
This stand holds a bottle inverted, so its contents will always be right next to the cap.
This stand was design specifically for use with Aleene's tacky glue bottles, but will likely work with a variety of bottles.
The opening in the top of the stand is 29mm. The narrow portion of the stand extends for roughly 20mm. The top of the stand has a 13 degree conic dish to match the conic at the top of the bottle. The distance from the lowest point in the dished top to the base is 47.3mm.
Printing/Slicing Recommendations:
Detect Thin Walls may need to be checked when slicing.
Print with a 0.4mm nozzle.
A 5mm exterior brim is recommended for the revised designs.