Lockable Hinged Emergency Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Emergency Box made originally for a 70g pack of chips (chips not included). Some assembly (and glue) required.
- Ocena
- 4,667 / 5
- Polubienia
- 36
- Pobrania
- 134
- Wydruki
- 3
- Wyświetlenia
- 866
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The box was designed to be used with @fechnert's tamper evident lock remix (to be printed with 0.4mm nozzle max!).
Inner dimensions: H 174mm x W 144mm x D 77mm
The lid in my model has to be glued together, because I wanted the letters on it to be flush with the outer surface and I do not own an MMU or similar.
I printed it in PLA, but feel free to choose other material if required.
Assembly Instructions:
- Put the lid on a flat surface facing down.
- Insert_Top goes into the upper hole of the lid, Insert_Bottom goes into the lower hole, and finally the grate covers the middle hole. Use your preferred polymer adhesive to glue them together. Let it dry sufficiently.
- Next, put the Case on a flat surface, so the opening is facing up. Place the lid on top of it, and firmly press the hinges into place one after the other.
- Thread the lock through the opening and seal it
- DONE (Haribo time?)
Disclaimer
This box was simply designed as a gag item. That's why some otherwise maybe common features, such as wall mount holes, are missing.
UPDATE v1.1 / 15.01.2024:
Slightly optimised design of the inserts and the grid, mainly to be able to print everything with a 0.6mm nozzle. Also added .3mf slicer files with some suggested tweaks. Removed the Gcode files.