1 / 2
Anycubic Kobra Filament Guide changed to Fit Artillery X3 Pro — zdjęcie 1
1 / 2

Anycubic Kobra Filament Guide changed to Fit Artillery X3 Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix from Anycubic Kobra Filament Guide Roll by ZeroFlo Change Clambsize to Fit the Artillery X3 Pro

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
414
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Clambsize is now 20.1mmx20.1mm

Shorter thongs to get over and dont block the LED-Stripe

Move the longhole to match with the rail (but fits for me without srews)

Printed on my Artillery SW X3 Pro

Layerheight: 0.2

10% infill