Adafruit Trinket M0 Mounting Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mounting clip for Trinket M0 with f3d/step/obj files for integration into other projects
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed to mount an Adafruit Trinket M0 inside a project, and since there were no existing models that accomplish this I've exported just the mounting clip as a separate object that can be incorporated into any project.
Slight disclaimer, in my experience the clips will break off after just a couple of uses (at least in ABS - probably it's better with other materials). I've tried to balance flexibility/ease of installation with durability, but it's best to only install the Trinket once you've got any wiring finished and ready to leave installed.
Features
Clearance below the board allows all 10 header pins to be attached (from the top)
Clips stay out of the way of USB port to allow programming and power
Simply use the STL as-is to clip or glue into anything. I've also included the .f3d, .obj, and .step files so it can be easily incorporated into your own projects.
Please post a make if you find this useful!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Matterhackers ABS Black