Milwaukee 125mm M18 BOS125 orbital sander pad alignment tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to align sanding pads for Milwaukee M18 BOS125 orbital sander.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 914
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
The original model by Lookahead is simple and effective.
Unforunately it doesn't work with the Milwaukee M18 BOS125 orbital sander.
The pins are a pinch to wide, and they are space to far apart.
On the Milwaukee the center distance is 66 mm, and the pin diameter is 8.5 mm.
Rebuilt a working version from the ground up, without the side indentations to make it work.
Printed with the following print settings:
- Slicer: OrcaSlicer
- Layer Height: 0.20 mm
- Filemanent: esun Red PLA+
- Perimeters: 3
- Top/Bottom Shell layers: 3
- Infill Densisty: 20%
- Infill pattern: Gyroid
I'd recomend sticking with Rectalinear, Cubic or Triangular infill patterns, if you do not like Gyroid. You can feel a tiny amount of flex with Gyroid, if you try to bend the tool.