Toolbox handle and repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool box repair kit
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Handle and side straps to attach the shelves to the tool box. A 1 mm larger hole is needed in the box for the handle. Print the tapes upright with supports as shown in the model for added strength. I will add dimensions and an additional photo. I think the handle and straps are suitable for the STANLEY tool box. The original handle was yellow and the straps were black. The photo does not show that the short part with the turned pins is added.
Please give a HEART for the download! We like to collect them. ;-)
PRINT SETTINGS:
Total time → 3 hours 30 min
Number of print files → 3
Layer height → 0,2
Layer width → 0,6
Perimeters → 3
Infill → gyroid, 20 %
Material → PETG
Total weight → 36 g
Support type → yes, only on bed