Leather splitting, edge chamfer, cutting tool or just scrapper for utility knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D model is tool for leather working based on utility knife. Splitting, edge chamfer, cutting or scrapper.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 275
- Wydruki
- 0
- Wyświetlenia
- 2078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid knife 199.70 so you do not have to sharpen that. When bold just change.
https://www.martor.com/en/products/blades/product/trapezoid-blade-no-199
Model consist of 2 part. I am printing both from ASA material as it stiff and can be easily sanded.
For assembly you will need 4 pcs of M3 nuts, 2 pcs of M3 counter sunk screws 6 mm total length and 2pcs M3 cylinder head screw 10mm thread length.
VERY important, Angle of the bottom half aligns with utility knife sharpening angle.
11.1.2024
I am adding protection blade protection part. Printing of this part is better with the 5mm Brim as the base is a bit narrow.