Mini Surfboard with Dual Fins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print verticle with fins down and add support and brim. I printed off of the Elegoo Neptune 4 Pro.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
I liked other models out there but wanted to create one with better fins and a bit of a rocker.
The board has a big enough hole you can thread a loop for your finger and surf the wind out of a car window, hang it as a decoration (car rearview mirror), make it a keychain, use it as a pocket fidget toy, etc.
I've printed at both 3mm and 1mm and both work. You can take a lighter to the tip of the board and increase the rocker to.
I print verticle with supports and a brim for maximum hold. On a few prints, the supports have gotten stuck to the fins and I take a sharp knife and clean it up.
Should be scalable to your desired size.
Lastly, I've added a small 1.5mm dip on the top of the board so you can add adhesive grip tape.