K1 Max 3dclippy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part to automate the https://www.3dchameleon.com/ on the K1 Max
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 4473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3dclippy for K1 Max.
Print in 25 percent gyroid infill, petg. Just a suggestion but from my limited testing this works best. No infill in the filament path, use a small drill bit and manually twist through to remove the burrs from lack of support. may not be necessary but I did it anyway.
Other materials;
- small nail or something similar for the arm to pivot
- Hot glue to keep things in place
- small zip ties
Two versions, one for the door spring from the picture, clipped down by 4 rings. The other is untested but for standard pen springs. Be sure you're happy with the blade release or you run the risk of ruining your print and potentially parts or fire or… I take no responsibility for what may happen. lol.
To put the frame clip in place start with the bottom and slide the top over the printer's included scraper, or you run the risk of tearing the thin foam.
Have fun and happy printing.