Turbocharger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You need Electric Motor 775 with 5mm shaft (13€Amazon) 4x M6 Screw + Nut 2x M4 Screw to attach the motor That´s it.
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 1224
- Wydruki
- 2
- Wyświetlenia
- 8683
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
You need
- Electric Motor 775 with 5mm shaft (10-20€ on Amazon)
- 4x M6 Screw + Nut
2x M4 Screw to attach the motor
That´s it. The housing was a little bit modified to fit the the bottom plate (Turbo Bodenplatte Thalmann) flat in a Elegoo Saturn printer. Instead of 5 screws there are now just 4. So don´t be confused when the .stl file shows a different part as the pictures. That pushes the printing time down from 8 hours to 20 minutes.
In case you´ve got a different electric motor, you can simply mount the motor a different way by drilling new holes for instance.
When you got questions or need help with your assembly, don´t hesitate to ask.
Best regards
Da real Radioactiveman
Print Settings
Printer:
Elegoo Saturn
Rafts:
No
Supports:
No
Filament: Elegoo Resin Resin Custom Section
Category: Automotive