1 / 3
Speaker Wedge / Stand For Edifier R1280DB (or similar bookshelf Speaker) — zdjęcie 1
1 / 3

Speaker Wedge / Stand For Edifier R1280DB (or similar bookshelf Speaker)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple wedge style stand to lift and point bookshelf speaker towards you for aiming tweeters.

Ocena
4,75 / 5
Polubienia
49
Pobrania
411
Wydruki
5
Wyświetlenia
2106
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

As seen in my workspace redesign video above…

Simple two piece wedge style speaker stand design. Trim piece snaps into the wedge and you can add some glue to be sure it doesn't move.

Edifier R1280 are great budget friendly near field speakers for your computer desk setup with attractive wood grain design. Optical input + bluetooth connection to other devices is super convenient to also stream music from your phone.

Putting them flat on your desk does not optimize direction of tweeters, they should be tilted up towards your ears. These lift the speakers ~25mm at the front

The feet from the speaker will sit in the pockets on the wedge so they don't slide off. There are more pockets on the bottom of the stands for 1" (25mm) furniture pads. You can use felt or rubber pads to prevent marking on your desk or unwanted movement.

Check out the speakers and other parts below. As an Amazon associate I may earn a small commission at no extra cost to you. 

Edifier R1280DB

https://amzn.to/3TT4hYB

1" Non-Slip Pads:

https://amzn.to/3TSZS85

 

 

Tagi