1 / 1
Bike stand tool tray Repair w/ tool and through axle holders — zdjęcie 1

Bike stand tool tray Repair w/ tool and through axle holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bike stand tool tray Repair with tool and through axle holders

Ocena
5 / 5
Polubienia
23
Pobrania
135
Wydruki
1
Wyświetlenia
1124
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix from this awesome design: https://www.thingiverse.com/thing:2577439

I moved the holes on the left side to the bottom so that no supports are needed and adjusted their sizes to 3-9mm so I can store my normal Allen keys that do not have a big handle.

I also changed the sizes of the front holes; from left to right: 1x 12mm, 2x 13mm, 2x 14mm and 2x 15mm. This was to make it more versatile, so I can for example store my through axles when cleaning the bike.

I printed it in PETG so it wouldn't melt in the sun, but you can choose your own filament and settings depending on your intended use case.

Otherwise the same instructions still apply, here is a copy:

You will need to buy 2x M6 carriage bolts (35 or 40mm), with M6 wingnuts.

Category: Sport & Outdoors

Tagi