Hydration Bladder, Bottle, Hose Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model is designed to fit within the Creality K1 dimensions. Will hold a standard 1.5/2L bladder, hose and two bottles
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Needed a drying rack for running bladder, bottles, hose, and all the little parts. This is version two, down the road i'd like to make it so more parts come apart for storage while not in use, but for now, this works.
Have tested a Hydropack 2L bladder along with Salomon hydroflasks and fits all properly. there is a small area for the bite valves and such to dry.
Very open to suggestions how to make better more fit more parts universally.
3 parts but will need to print two of the bottle dryer extensions.
Build with semi standard parameters.
.4 nozzle
.2 layer height
2 walls (EDIT: use more walls, probably around .8CM total, 2 walls ended up breaking the insertion point on one of the bottle holders after some use)
15% infill, though probably could use less, i was having top layer pillowing if i went lower though.
2 top surface layer at a min for the small parts area ramp.