1 / 4
Ubiquiti POE-54V-80W sleeve / Din Rail mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve to be able to Din Rail mount a Ubiquiti POE-54V-80W power injector. Use in conjuncture with a Din Rail clip.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 633
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
Thing to make the Ubiquiti POE-54V-80W Din Rail mountable. Works best in PETG or PC. You will need a Din Rail clip, either from the jungle site or make one yourself (model can be found on my profile).
Note that it is a very tight fit.