Bakuten shoot Beyblade launcher winder ripcord
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the winders I had broke, so I made a MOD. Requires Takara Tomy's original launcher.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 1821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an alternative winder.
Takara Tomy's Bakuten Beyblade launcher type winder.
To use v2 and v3, you need to modify the original launcher.
To use v2,
you need to cut the red part of the launcher's lid all the way to the top.
To use v3,
Similarly, v2 processing
Cut the area where the winder passes through the base of the launcher to about 1.3mm.
It is necessary to shave about 1.5 mm from the bottom of the winder's rotating gear.
Modifications are at your own risk, so please check them carefully.
The default is not actually printed, so I have not confirmed whether it can be used.
Notes:
Print this with PP/Nylon for a long lasting cord