Dog waste bag dispenser for aluminum deck rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispense pet 💩 bags from a 3" square aluminum porch railing post.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
Dispenser press fits into the post cap and a roll of bags snaps in between the pegs. This post cap has always been a little loose, so I made the fit into the post snug to help hold the cap on the post as well. If I fully seat the cap, the bags can be hard to pull out, but just slipping it in has held up well for me for the past few months.
I printed in PETG with the flat bottom surface on the build plate with organic supports painted onto the pegs. The spring action of the arms stresses the layer lines this way but I haven't had a problem yet. If it breaks I will make it printable standing up on a narrow edge to align the layers along the arms. I'm hoping the PETG will hold up, but it hasn't been through a summer yet, so we'll see if it fails when the summer sun bakes the black post.