Varram Pet Toy Wheel Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gear to replace the stripped wheel-turning gears in the Varram Pet Fitness Smart Robot (my model is VRPF 1000)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I printed this with Overture Nylon filament using a 0.2mm nozzle on a QIDI X-Max 3. New gears are the gray ones in the picture.
I slowed the perimeter speed to 30mm/s to ensure the teeth and holes were accurate. I've included the STEP file here so you can adjust the holes to work with your filament/printer.
They've stopped making this toy and my dog ruined the gears. I wanted to use it for my cats and was unable to buy a new one, so I made new gears instead. Created using Fusion 360, digital calipers, and lots of tears. But my cats are happy again.