Avenged Sevenfold Deathbat LED Night Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A LED light with the deathbat logo of the metal band Avenged Sevenfold.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 107
- Wydruki
- 2
- Wyświetlenia
- 734
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
"He who makes a beast out of himself
Gets rid of the pain of being a man"
A DIY LED light with the deathbat logo of the metal band Avenged Sevenfold.
The components are easy to print and can be easily assembled.
Components:
Main body: Two versions are provided, one with small slots for the inserts that provide some light through the sides, and one without them. If you print with inserts, supports are needed.
Inserts (optional): these provide some additional light through the sides. This should be printed from translucent material. I've used glass-reinforced, transparent PLA for this purpose.
Transparent plate: A plate that provides the background for the logos. It should be translucent, again glass-reinforced transparent PLA was used. You can use anything translucent instead of this plate.
Backplate: The backplate slides into a dovetail slot on the back of the main body.
LED strip (or alternative): I've used a cheap, USB-powered LED strip as a light source, but anything similar will do. This came with a remote controller that can control the color of the light.
