1 / 3
Orb Audio two speaker horizontal mount (Mod2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combine this model with two orbs and a single mount from a mod1 to create a mod2 - two orbs mounted horizontally.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I created this bar to reduce the (visual) clutter on my workstation by mounting two sets of two orbs (four total) horizontally. They sit on my desk under my monitor.
Vitamins:
- 2 orbs
- 2 screws from original Orb stand
- 1 original Orb stand (e.g. from Mod1)
Printing:
- Find the slot where the original Orb stand is inserted. Print with this slot facing up - the opposite side should be on the build plate (see photo)
- If your cooling is sufficient, or you don't care about perfect circles where the bolts are inserted, print without supports
Assembly:
- Remove all stands from your Orbs
- Not the orientation of the slot in the middle of the part - this is where the stand will be inserted, so you want it facing down
- Insert two screws into the back of the part
- Attach two Orbs using the screws - route the wires however you'd like
- Insert the original Orb audio stand into the slot on the bottom side
- Eat Haribos