IWISS Crimping Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of 2 Thingiverse projects. I needed a storage box for my crimping tool And this was a great shortcut.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was custom fit for IWISS SN-2549, but once lots of Crimping tools are similar, may fit another brands and models.
It's a tight fit, so if your printer needs more hole tolerances, you can increase it in your slicer with a value from 0,2 to 0,4mm. For mine it worked at first attempt.
The text was added at Orca Slicer, so if you have a different tool and uses Orca, can double click the text and change it, or remove completely.
Printed using Sunlu PETG for the box and Sunlu TPU for the inserts.
Used M3x32mm bolts, but the correct length is M3x30. I'll replace the bolts when I can.
This was printed with my Bambu Lab P1S with no AMS and Orca Slicer. Changed colors manually.
I've used a filament change g-code that I don't remember where I get it, but it was in a forum, so I won't share it until I get the source.