1 / 2
Rey's Lightsaber Mount (Galaxy's Edge Metal Saber) — zdjęcie 1
1 / 2

Rey's Lightsaber Mount (Galaxy's Edge Metal Saber)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Minimalistic, custom fit wall mount for the Galaxy's Edge Version of Rey's Lightsaber.

Ocena
0 / 5
Polubienia
20
Pobrania
123
Wydruki
0
Wyświetlenia
1168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made a custom fit wall mount for Rey's Lightsaber - The heavy, metal constructed one.  (this one https://www.shopdisney.com/rey-skywalker-legacy-lightsaber-hilt-star-wars-galaxys-edge-400930163309.html)  

Fits beautifully under the “gear” looking collar portion. 

Doesn't wobble or tilt forward even with blade attached. 

I strongly recommend the use of Drywall anchors, or hitting a stud if you'll be regularly mounting/unmounting the saber.  If you are just hanging it up and leaving it you'd probably get by with just drywall screws… Probably. If you go this route… MTFBWY.  You'll need it. 

(just use drywall anchors…) 



Print with at least 3 perimeters and 20% infill - this blade is heavy! - Flip file upside down for printing (not on its back) (so the top side will be on print bed) This will give it best strength. 

Other than that, Feel free to use supports in screw holes, but I didn't and the screw hid all the noodley bits after a quick cleanup. 

 

Tagi