QIDI X-Max 3 Case cover - Z-axis holes (magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed some covers with magnets for the z-axis holes.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed a cover to close the holes for the z-axis within the printer. and still be able to use the full print height. The cover has magnets that will attach to the bed bearings and to the z-axis rod. The cover will be stopped after the holes, so that the cover doesn't move up wiht the bearing and holded in position by the magnets.
The design uses four magnets size 3mm diameter, 2mm height.
Arachne setting for perimeters must be turned on.
Assembly instruction:
First glue the magnets to the cover hole (press them in), put the two cover halfts on the rod and move the cover up until they attach to the bed bearing. After this glue the splitted ring to two cover-halfs. Last push the cover down with the outer ring and press it into the z-axis holes.