traxxas udr qs8 single plug mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i made a QS8 plug adapter for my udr as all my batteries are qs8 plugs and the zee 7000MAH 6s lipo fits the factory…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
i made a QS8 plug adapter for my udr as all my batteries are qs8 plugs and the zee 7000MAH 6s lipo fits the factory battery tray perfectly all you'll need to do is modify the chassis some by grinding out the battery plug bigger to fit the over sized qs8 plug and i also made a screw hole to add a 2MM sized screw to hold the plug in place as a extra safety also you CAN NOT run the QS8 wire cover as its not made for that at all! haven't seen anything at all on line with this plug and figured why not!!! happy racing the random red and get weird are for battery voltage telemetry to the rx
printed top side down for less supports needed
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
25%
Filament: vo3d pla high impact black
Notes:
i printed top side down so there's less supports needed
How I Designed This ===================
made in fusion 360
Category: R/C Vehicles