Multiboard fitting installation/removal tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This threads into multiboard pieces to more easily remove them, it also has a socketed end to tighten nuts as well.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 437
- Wydruki
- 7
- Wyświetlenia
- 2395
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model I made to be able to more easily remove the tight multiboard pieces, you can screw it in slightly and then push either left or right. I knurled it for better grip and put a socketed end on to tighten/loosen the bolts and nuts for the system as well. I leave mine screwed into the board when not in use.
Print Settings:
Printer : Bambu Lab X1C
No supports
45% infill 5 walls (might've been overkill) (for extra strength on the threads and socket)
Checked - Extra perimeters on overhangs.