Protection cap for RCA/AV/composite/component and subwoofer connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps with handles meant to protect RCA connectors (male and female) from rust and dust
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 315
- Wydruki
- 3
- Wyświetlenia
- 1046
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
If you're a retrogamer or a collector of retro tech, or if you like high quality audio and invested in a receiver with external speakers and a subwoofer, you've probably run (or know someone who ran) into the problem of RCA connectors that are not being used for some time either rusting or just becoming very opaque, then on it's side there's a RCA connector that has a cable plugged in since the time you bought the device, you remove the cable and… it looks like new!
With these caps I intent to recreate that same effect, protecting the connectors that are not being used from the effects of humidity from the air.
There's 3 different caps, one for male RCA connectors (the cables that go to the back of the TVs, DVD players, VCRs, etc), one for male subwoofer connectors (they are larger than the other RCA connectors), and one for female connectors (they fit TVs, subwoofers, and all of the devices I tested them on).
I've also made available the .f3d files, in case you want to make any adjustments to the design :)