Addams Number Pad Attachment for Cockpit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to make an attachment for my number pad to use as macros.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This one is for Sim Lab GT1 EVO. I believe it should work with any cockpit that use this kind of build. It's for this number pad https://kbdcraft.store/products/kit-addams
These are the screws I used
4 x M8x16mm Screws (from the cockpit assembly)
2 x M8 nuts (from the cockpit assembly)
2 x M8 Slot-Nut (from the cockpit assembly)
4 x M3x20mm Screws (I used this https://www.amazon.com/gp/product/B0143GZHDG/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 )
I was trying to put screw nuts for the base but did not work for me. but it should work fine without it.