1 / 3
Compoundable washers - self fasting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you need to put washers on an already assembled rod. Mine was a door axis on a fridge. With these washers easy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
You can combine both washers or you use a single one. The teeth are aligned so that the washer cannot slip out, as soon as weight pushes on it.
I recommend printing it out of sturdy plastic and with at least six layers on the top and bottom. Also at least three rounds in wall thickness are recommended.
The third picture shows the angled washer fixing my fridge.
Due to the differences in printing, I tke no responsibility for any damage resulting from this print.