1 / 10
Halo Energy Sword — zdjęcie 1
1 / 10

Halo Energy Sword

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

https://www.youtube.com/watch?v=eky3g7WeSCQ Read the Full Tutorial: https://learn.adafruit.com/halo-energy-…

Ocena
4,8 / 5
Polubienia
609
Pobrania
972
Wydruki
6
Wyświetlenia
13 147
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution

Read the Full Tutorial:
https://learn.adafruit.com/halo-energy-sword/overview

Shop for 3D Printing parts on: http://adafru.it/3dprinting

Build a NeoPixel LED powered Energy Sword with Bluetooth controls! Read the full build guide on: https://learn.adafruit.com/halo-energy-sword?utm\_source=youtube&utm\_medium=videodescrip&utm\_campaign=3dprinting

In this project we’re making a 3D Printed Energy Sword from the Halo video game series. Inside the blades are NeoPixel LEDs which are connected to an Adafruit Feather BLE 32u4 micro-controller.

A 2000mAh lipo battery will provide several hours of energy and can be recharged over USB.The blade is 86cm (34in) tall and the whole sword weighs just under 1 pound.

You can connect to the Adafruit Feather through Bluetooth. The Adafruit Bluefruit LE Connect app for iOS or Android lets you change the animation or color of the LEDs.

Print instructions

Licence: Creative Commons - Attribution Category: Props Print Settings

Printer Brand: Ultimaker

Printer: Ultimaker 2

Rafts: No

Supports: Yes

Resolution: .18

Infill: 10

Notes:

We used the .8mm olssen block nozzle to speed up print times for the blade parts. Use custom supports for the handle parts. Print the handle vertically to increase the z resolution.

Tagi