An Old World Base Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add 5mm to your length overnight! And your girth!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have models from a really old world on 20mm square bases, but you want to make their bases 5mm longer and 5mm wide, then this is the little framey deal for you!
I printed as oriented in the file, which is upside down, in PLA, 0.1mm layers, 10% infill, but there wasn't really any infill generated. I have a textured plate, so it gives a top surface of the frame that is similar to the citadel base textures.
I've also included the OpenSCAD file for if you want to make your own in other sizes to share with the community!
It's got about half the code needed to make rectangles as well as squares, but not all of it. So making other squares should be easy. Making rectangles will require a bit more OpenSCAD skills.