1 / 7
Plano 3700 Series Small Parts Organizer Bins — zdjęcie 1
1 / 7

Plano 3700 Series Small Parts Organizer Bins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bins to fit Plano 3700 series organizers. This remix is a wider version for use without the original Plano dividers.

Ocena
0 / 5
Polubienia
44
Pobrania
218
Wydruki
0
Wyświetlenia
1815
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

THERE IS NO CAD FILE.  I hacked these together in TinkerCAD.    

 I've been searching for a cheap small parts organization system that was the best fit for the size and quantity of parts that I want to store.  The best fit for me turned out to be the Plano 3700 Series.  I started with the “Plano ProLatch Stowaway Large Clear Organizer” (burgundy latches) purchased locally at walmart for $5.24 each.  This model has a larger bottom section that can accommodate related tools you may want to store with the small parts.  I also purchased a “Plano StowAway Tackle Utility Box - 3700 Series 4pk” (black latches) from Sportsman's Warehouses for  $34.  Figuring out the different models is a bit confusing, but anything labelled 3700 series should have the same outer dimensions.  They make a lot of other models in the 3700 series, but they cost a good bit more than these two models.  If you want to figure in the cost of filament, a 1kg spool of filament yields about 2.5 storage boxes worth of bins.  It may go a bit further if printing larger bins.

     I found and printed Brandon's bins, but didn't like how much empty space was left between them if not using the Plano dividers, especially on the model with the black latches.  I also wanted to speed up the printing process if possible.  These were redesigned from scratch to be 2mm wider with slightly rounded corners to speed up printing time.  In the end I don't think the corners look any more rounded, but they fit the way I want.  

     I am printing these with a 1mm nozzle (walls are 1mm thick) with .3mm layer height (bottom is .9mm thick).  I can print them slightly faster with the bins oriented with the short side facing the part cooling ducts.  If you are having problems printing them with a large nozzle, you probably need to slow down.  There is only one of each corner piece.  To get the opposite corner, mirror it in your slicer.

     I also designed a completely original bin system where bins are rounded to print faster and there is no need for special corner bins.  https://www.printables.com/model/716448-fast-print-simplified-plano-3700-series-small-part

That system also includes larger bins for the bottom section that could also be used with these bins.  The rounded system makes more sense, but I prefer the look of these squared off bins for things like screws.  

EDIT: After working through a couple organizers arranging screws, the rounded version is so much easier.  With the squared off ones I'm having to reprint different size corner bins and redo labels.  With the rounded ones I could have just moved the current bin to the corner.

DOUBLE EDIT: See the fast print version for some basic measurements on building a rack to hold them.

Tagi