Devil Horns for Headsets and Headphones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These devil horns are made to be attached to a headset.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 505
- Wydruki
- 0
- Wyświetlenia
- 1850
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These devil horns are made to be attached to a headset or headphones.
The .stl file is one single horn.
The .3mf file is for Bambu Studio and already includes two horns on the build plate.
Print Settings:
I printed the horns with 0,12 mm layer height and no supports which works fine for me.
However, you can automatically generate support structures if you want to. When I did that the print came out fine too but I sometimes had to file down sharp edges left from the support.
Also I changed the infill pattern to gyroid and set the seam position to nearest.
Assembly:
To be able to attach the horn you can order velcro cable ties from Amazon.
Just simply put a velcro cable tie through each of the horns and wrap it around the top part of your headset.