Centrifuge adapters from 50 mL to 15 mL Falcon tubes and various glass vials
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Centrifuge adapters from 50 mL to 15 mL Falcon tubes and various glass vials
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 242
- Wydruki
- 1
- Wyświetlenia
- 1696
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Public Domain
We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to centrifuge stuff that's larger than 1.5 mL but smaller than 50 mL.
3D printer to the rescue of course!
Here are adapters/inserts for 3.5 mL, 7 mL, and 14 mL tall form glass vials, and 15 mL Falcon tubes, all of which are in common use in our lab and fit into the 50 mL Falcon tube slots in the rotor. Printed with 3 perimeters and 40% infill from PLA. Our centrifuge/rotor combination does just over 2000 gees at maximum speed and we've not had any issues with the adapters yet in several years of use. If yours pulls many more gees than that, you should probably increase the infill percentage.
The 7 and 14 mL vial adapters and 15 mL Falcon tube adapter are in two halves: this facilitates extraction of vials and cleaning if required. The 3.5 mL insert is a simple cylinder which takes the 3.5 mL vial and is then put into a 7 mL adapter.
Supports required.
Edit 26/07/2026: added the single-part (not split into two halves) adapters following a request.