2" Rubber Duck Wall Mount Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your 2" rubber ducks on your wall with pride!
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Just get back from a cruise? Do you own a Jeep?
If the answer is “yes”, then you likely are the proud owner of several tiny rubber ducks.
Don't let them clutter your desk or gather dust in a drawer - display them on your wall with pride with this minimalist wall mount display!
Fits and holds a standard 2" rubber duck. Long tails are not a problem!
I mounted mine to the wall with double-sided tape.
I've provided a short and long version, depending on how much of the mount you want to be able to see. The longer version works well for Command strips. If you want to see even less mounting, you can use the short version and some double-sided tape.
I used Hatchbox PLA and an 0.8mm nozzle, and each mount prints in 11 minutes!
I recommend at least 3 perimeters just to be safe.
Created with OnShape.