DO NOT USE - LINK IN DESCRIPTION - Pannier Hook for 10mm rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bolt-on pannier hook designed to snap onto 10mm rails. Resin/SLA print recommended. (THIS VERSION FAILS)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 950
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
So after a few weeks of iterating and testing, I now have a design that actually works. You can find that here: https://www.prusaprinters.org/prints/72725-bicycle-pannier-hook-for-10mm-tubes
Leaving this one here, but it's far too wimpy.
ORIGINAL DESCRIPTION:
This is a bicycle pannier hook designed to clip onto 10mm tubes-- tested on Axiom and Surly racks.
Printed on an Elegoo Saturn at 0.075mm layer height in Siraya Build Resin, a pair of them appear to hold 11 pounds (5kg) with no problems even when bouncing the bike. They have not been road tested yet.
It bolts on with two 6-32 flat head bolts and includes a slot for 3/8" grosgrain ribbon to be threaded through the body in order to back-up the hook attachment. Hole spacing is ¾" OC.