ZORRO Gimbal Guard for wide sticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This ZORRO Gimbal Guard supports wide sticks and features custom text on the crossbar and a solid mechanical lock.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I based the design on an existing one but remodeled it to support wider stick ends, better symmetry, a tighter fit, and customizable text. The gimbal guard I created can support any sticks that will fit inside the 18mm inner diameter and 27mm height. Also, it will connect more solidly than any other gimbal guard out there. :)
I've provided two options to print, one with a direct M3 screw hole, and one sized for an M3 heat set insert at the pivot joint. I prefer the insert.
Printing notes:
- 0.2mm layer height
- It's designed to be printed with the top of the main part on the build surface. You will get a cleaner print, much better text, and fewer support artifacts.
- I like to print mine with 4 or 5 walls so there is more strength around the screw hole.
I'm adding my OnShape link so anyone can copy and modify it for custom text or their specific sticks.
Enjoy!