Panda Bookmark – Simple 2-Color Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute panda bookmark designed for an easy two-color 3D print.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 298
- Wydruki
- 1
- Wyświetlenia
- 773
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're looking for my Bambu print profile, it's over at MW.
Cute panda bookmark designed for an easy two-color 3D print.
The panda head sits above the page so it peeks out of the top of your book, making it easy to find your place while adding a bit of personality to your reading.
The model is designed so the color change happens early in the print, making it simple to print even without a multi-material system.
Features
Cute panda design that peeks over the top of the book
Easy two-color print
No AMS / MMU required
Thin and lightweight so it slides easily between pages
Quick print
Printing
Print flat on the build plate
No supports required
PLA works well
Pause the print and change filament at 1 mm layer height
Color Change
The model is designed so the filament swap happens very early in the print.
Start printing with the body color (black).
Pause the print after 1 mm height.
Switch to white filament for the panda face.