HTC Vive Base Station Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rubbermaid FastTrack compatible mount for HTC Vive base station mounts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design allows HTC Vive users to mount their base stations to the top rail used by Rubbermaid FastTrack shelf systems. To install, you angle the top into the rail, bring the bottom into contact with the wall, and lower the mount onto the top rail. It is a loose fit, and can still slide along the rail, but will not fall out.
The design requires 2x ¼ inch hex nuts, which install into the back into the hexagonal holes. Then the base station mount can bolt onto this mount!
For FDM printing, I recommend printing on its side with optional supports. PLA with 20% infill has worked well for me.