Anycubic Kobra Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified make of the original feet that come on the Anycubic Kobra line of 3d printers
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 919
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a taller set of feet with a wider foot base for the Anycubic Kobra printers. When I got my new work tables for my printers they had access holes and hand holes on the top surface and the Kobra kept dropping a foot into them. So I took the original foot design and made them taller and added a foot pad that was large enough to not drop into the holes in the table. Plus, I had to make them red to match the other accessories I was making. The material is PLA. Nozzle temp 195-220 degrees. Infill 25%. bed temp 60-70 degrees. They may fit other printers with the extruded aluminum frame.