1 / 5
Azul: Stained Glass of Sintra - Board Tray — zdjęcie 1
1 / 5

Azul: Stained Glass of Sintra - Board Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tray for the board and pattern strips for use with Azul: Stained Glass of Sintra.

Ocena
0 / 5
Polubienia
11
Pobrania
66
Wydruki
0
Wyświetlenia
548
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I got tired of the pattern strips sliding around so designed a tray to hold them. The OpenSCAD code used to create them is also included. If you want to make the holes in the tray smaller, adjust cavity_padding in the code and regenerate. Also consider making tray_bot_h larger if you want the base of the tray to be thicker. As included here, I found the resulting print a touch flimsy but they have worked well!

At 245 mm x 239 mm, this is a large print. On my BambuLab X1C, I had to follow the below instructions to utilize the full print bed.

https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations#how-to-print-using-the-full-build-volume

Tagi