1 / 1
'Mountain Climber' Ender 3 CoreXY bracket — zdjęcie 1

'Mountain Climber' Ender 3 CoreXY bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bracket that allows for 2 additional linear rails to be added to the Ender 3 CoreXY kit from Aditiva3d.

Ocena
0 / 5
Polubienia
4
Pobrania
29
Wydruki
0
Wyświetlenia
584
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This model is an updated version of this model:

NOW DEFUNCT: 'Horse Shoe' Ender 3 CoreXY bracket by lukatrkla | Download free STL model | Printables.com
 

This model adds 2 additional features:

It is thicker, and therefore can be 3d printed
It does not decrease your Z-axis height, as did the old design

You'll need longer 4 m5 screws than the kit provides to make this work. Mine were 16mm long and worked fine.
Also, you'll need additional linear rail(s) and the bolts and whatnot to mount them.
 

I recommend printing it so the layer lines are parallel with the bed for maximum strength. This will require supports. I printed with PETG 100% infill


Aside: I only have 1 linear rail, which I added to the left 4020 extrusion. This eliminated problems with the bed tilting. If you want to add 2, you'll have to move the power supply out of the way. I used a spacer I designed (included in the files) for the ender 3 pro power supply.
The spacer should be around 2cm long, I think I might have scaled the piece to be 2mm long xd. EDIT: I can confirm that the bracket has enough clearance from the power supply if mounted on the back 2020 aluminum extrusion.

EDIT: For all, this bracket seemed to improve the wobbly bed, but for some, a little residual wobble remains. I felt morally obliged to warn you that this might be the case for you.

----

This bracket aims to remove a common problem with the Ender 3 CoreXY conversion kit by Aditiva3D, which is a wobbly print bed. This bracket, named mountain climber due to it looking like a man's hands while climbing, allows for 2 additional linear rails to be added to the Z mechanism, which aims to mitigate this problem.

Included are the .stl and .f3d files required for making the bracket.

Thank you to all the community members who contributed to the design. For my part, I am finished, but if you want to keep messing around with these designs or modifying them, be my guest :)