Gas Meter ESP8266
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a magnetic sensor and the ESP8266. The two components can therefore be mined directly on a gas…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a mount for a magnetic sensor and the ESP8266. The two components can therefore be mined directly on a gas meter. There is a flap on the front that can be opened by sliding it open.
You need 6 screws for assembly:
1x M3 x 10mm (screwing the two pressure parts)
1x M5 x 30mm (attachment of the parts to the gas meter)
4x M2 x 5mm (attachment of the ESP in the housing.
Magnetic Sensor: LITT 59025-010 (Reed-Sensor 59025 Serie, 1 NO, 10 W)
I also added jumper-wire-connectors (female) to the cables of the sensor for a easy assemby.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Das Filament PLA Black
Category: 3D Printing