Saturn 2 PTC Heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTC heater for Saturn 2
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
My printer enclosure required heating due to the low temperatures in my workshop. The published equipment did not meet my requirements and I have a different thermostat in use for temperature control.
The holders and model carriers available here are all suitable for 12V/24V systems with 100W power. My PTC element has more power and melts the printed housing after a few minutes in the side areas where there is not much airflow.
That's why I developed a model that accommodates the original housing.
Please also check the dedicated control unit designed for this heater:
DIY Heating System for SLA 3D Printers