Small bathroom cabinet with shelf and "frosted glass" doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is small bathroom cabinet (194H x 178W x 83D) with transparent door backside which resembles frosted glass.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 959
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
All parts can be printed without support, however i recommend brim on all of them except on doors and door backsides. Infill is 15%, adaptive cubic.
Printed with 0.2mm layer height in Prusament PLA Marble Grey and Violet transparent PETG. I used PETG for door backside because it is transparent and first layer on textured sheet gives frosted glass effect to it which makes it much nicer, but it can be made of any other filament.
Use filament to connect hinges and superglue to connect doors with their back side (there is slot for it on inner side of doors). Knobs can be glued to doors but it is not required. If gluing knobs please bear in mind to add knob extension (hook) on door before applying glue.