Magic Wand Effects with Circuit Playground
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add motion triggered sound and light effects to any prop with Circuit Playground.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 1126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Add motion triggered sound and light effects to any prop with Circuit Playground. This magic wand was designed specially to use the Circuit Playground as its centerpiece effect.
https://www.youtube.com/watch?v=hqGEoQycUnM
https://learn.adafruit.com/sword-and-wand-prop-effects-with-circuit-playground/magic-wand
It is 3D printed with a mix of translucent and opaque materials, has a mounting plate onto which you can secure the Circuit Playground, as well as an integrated LiPoly battery and on/off switch.
In addition to the Circuit Playground, LiPoly battery, and switch, you'll also need four M3 x 6mm screws and nuts, two M3 x 16mm screws and nuts, and four M2 x 6mm screws and nuts.
Print instructions
Licence: Creative Commons - Attribution Category: 3D Printing Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: Yes
Supports: Yes
Resolution: 0.1mm
Infill: 20
Notes:
Print the star parts in translucent PLA, the rest can be any color you like. You'll need to print ten copies of the trim piece.