Mini Splitter v2 for MMU2+1s mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is our improved v2 MINI splitter for the mod MMU2+1s. Added more strength to the base and splitter.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 271
- Wydruki
- 3
- Wyświetlenia
- 2058
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is our improved v2 MINI splitter for the mod MMU2+1s.
Added more strength to the base and splitter.
Recommended print settings:
- Material: PLA… but recommended PETG or ASA/ABS or resin
- 0.2 mm layer height QUALITY preset, 3 perimeters
- Infill: 20% GRID
- Position: splitter filament entry on the bed for FDM, SLA up to you
You can get MMU board firmware here:
https://github.com/Ryper3D/MMU2-1S_Firmware/releases
Needed set screw M3x3mm or larger to fix the PTFE to the splitter (one per PTFE, max. 10) and 1x M3x8mm (in SLA version) to fix holder to the splitter.
Screw only for pressing PTFE, not screw all the way.
https://es.aliexpress.com/item/32856334039.html
More info from MMU2+1s mod creators:
https://www.facebook.com/groups/744982719604122
Please use this cutter guide as assistance for the PTFE (18.5mm) between the splitter and Ryper Extruder:
https://www.printables.com/model/364903-ryper-splitter-185mm-ptfe-cutter-guide
Telegram Ryper3Ddesing group (Spanish group):