Housing for the electronics of the iFlight Nazgul5 v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an electronics housing for the iFlight Nazgul5 v3. It helps protecting the electronics and provides a cleaner…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an electronics housing for the iFlight Nazgul5 v3. It helps protecting the electronics and provides a cleaner look. Also it feels better when grabbing the drone by hand and gives a more polished overall experience.
The holes are fitting the USB-C port of the flight controller and the ports of the Walksnail Avatar HD Pro VTX with two antennas.
Print Settings
Printer:
Self built
Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Infill:
Doesn't matter
Filament:
Eryone TPU 95A
Notes:
I suggest printing the housing with tree supports as I had the cleanest results and easiest removement with that.
Category: R/C Vehicles
