WLED PSU 5v 10a
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power supply enclosure for Mean Well LRS-50-5 to drive WLED set up with space for ESP32 module.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a power supply enclosure with room for an ESP32 module to control WLED interface. Included with 2 ports for power injection at the users discretion.
**ALL HARDWARE IS M3 AND M3 HEAT INSERTS ARE REQUIRED
**STEP FILES HAVE BEEN INCLUDED FOR MODIFICATION
2 versions. One uses a typical barrel jack connector which has the screw on terminals for positive and negative. The other is a barrel jack connect which screws onto the case and you must solder the wires.
It uses the power rocker sold by biqu. All links will be placed below. The prices for the project will depend on the current prices for the parts available. as of 1/11/24 the total price of the project was around 35-40 dollars on electrical components excluding LEDS.
http://tinyurl.com/LEDPowerRocker
http://tinyurl.com/GX16-3pin
http://tinyurl.com/BarrelJack-Nut
http://tinyurl.com/BarrellJack-Normal
http://tinyurl.com/ESP32-USBC